NEUTRAL UNIVERSAL DETERGENT FOR INDOOR AND OUTDOOR ENVIRONMENTS Bottle 1000 ml - Cod. SP-130 - 8011045013100 Universal detergent suitable for the standard cleaning of treated fired brick. It cleans without affecting the previous protective treatments It is to dilute from 1:10 to 1:50 according to the kind of dirt to take away. The surface is to be cleaned with a cloth slightly wet with product, then rinsed out with little water. UNIVERSAL RESTORING DETERGENT FOR INDOOR AND OUTDOOR ENVIRONMENTS Bottle 1000 ml - Cod. SP-131 - 8011045013117 It cleans and restores the treated fired brick. If used at least once a month it restores the protective layer keeping the water-and-oil-repellent and anti-stain features time going by. Water down 1:1 and clean the floor with a wet cloth. Run two coats of product first to cleanse and then to restore. Rinsing out is not necessary.

It clears away polishes, oils and products used for the floor maintenance
It can be used pure or watered down up to 1:5. For a standard use we suggest a watering
down 1:1 1:2. Pour it abundantly on the floor and then rub down until it is thoroughly cleaned.
Rinse out abundantly with water.

DETERGENT FOR INDOOR AND OUTDOOR ENVIRONMENTS ANTI-SCALE AND PORE-OPENER
Bottle 1000 ml - Cod. SP-101 - 8011045012806

It is to use on new fired brick to take away residues of
concrete and salt and to prevent whitewashings due to saltpetre
It makes the fired brick surface even and ready to be treated with impregnation and
sealing. It is used watered down from 1:1 to 1:5 according to the floor condition.
As far as concretes and marbles are concerned, water down from 1:20 to 1:40. Do not
use on polished or plumbed marbles. Do not use repeatedly on cement-materials.
The SP-101 solution is to be poured on the floor and laid with brush, broom, cloth. We
suggest using the single-brush. On fire bricked floors, the treatment may have to be repeated once or twice. At the end rinse out abundantly with a lot of water.

SOAKING, WATER-REPELLENT DETERGENT FOR FIRED BRICKED OUTDOOR ENVIRONMENTS
Bottle 1000 ml - Cod. SP-112 - 8011045012929

SP-112 is used to impregnate fired brick, stone, and marble floors,
building structures in general, terraces, balconies, open galleries,
swimming-pool edges, etc. Thus treated the surface will be waterproof, anti-stain, water-and-
oil-repellent. SP-112 stands up well to bad weather conditions, like frost.
5-6 coats of product are to be run with roller, cloth, or brush until it is fully impregnated
A homogenous spreading avoids stains and spots.
With 1 litre of product you can treat a surface of 5-10 sm.

SEALING MATERIAL SUITABLE FOR POLISHED FIRED BRICK FOR INDOOR ENVIRONMENTS
Bottle 1000 ml - Cod. SP-110 - 8011045012905

It is to be used to finish the fired brick floor treatment off,
to assure resistance and to set off the anti-stain, water-or-oil-.repellent features.
Run 1-2 coats of SP-110 with a cloth or a whitewash roller. Make the product even. Let it dry
for 48-72 hours. A surface of 15-20 sm can be treated with a litre of SP-110

SEALING MATERIAL SUITABLE FOR OPAQUE FIRED BRICK FOR INDOOR ENVIRONMENTS
Bottle 1000 ml - Cod. SP-111 - 8011045012912

It is to be used to finish the fired brick floor treatment off,.
to assure resistance and to set off the anti-stain, water-or-oil-.repellent features.
Run 1-2 coats of SP-110 with a cloth or a whitewash roller. Make the product even. Let it dry
for 48-72 hours. A surface of 15-20 sm can be treated with a litre of SP-110.

POLISH SUITABLE FOR THE TREATMENT OF DARK BROWN FIRED BRICK FOR INDOOR
AND OUTDOOR ENVIRONMENTS.
Bottle 1000 ml - Cod. SP-120 - 8011045013001

After the treatment with the sealing material SP-110 or SP-111.
the fired brick floor can be coloured with SP-120, SP-121, SP-122,
or with mixtures of the products to make nuances possible or to make the
fired brick look older, Medieval, rustic, etc. It is advisable to water down the product
with 500 cc-1 lt. of water and to run 1 or 2 coats of the products with a roller, a cloth or a
brush to make it even. Test the colour on a hidden part of the floor to be sure it is the shade
you want. A surface of 10-15 sm can be treated with a litre of the product.

POLISH SUITABLE FOR THE TREATMENT OF CUIR FIRED BRICK FOR INDOOR
AND OUTDOOR ENVIRONMENTS
Bottle 1000 ml - Cod. SP-121 - 8011045013018

After the treatment with the sealing material SP-110 or SP-111.
the fired brick floor can be coloured with SP-120, SP-121, SP-122,
or with mixtures of the products to make nuances possible or to make the
fired brick look older, Medieval, rustic, etc. It is advisable to water down the product
with 500 cc-1 lt. of water and to run 1 or 2 coats of the products with a roller, a cloth or a
brush to make it even. Test the colour on a hidden part of the floor to be sure it is the shade
you want. A surface of 10-15 sm can be treated with a litre of the product.

POLISH SUITABLE FOR THE TREATMENT OF RED FIRED BRICK FOR INDOOR
AND OUTDOOR ENVIRONMENTS
Bottle 1000 ml - Cod. SP-122 - 8011045013025

After the treatment with the sealing material SP-110 or SP-111.
the fired brick floor can be coloured with SP-120, SP-121, SP-122,
or with mixtures of the products to make nuances possible or to make the
fired brick look older, Medieval, rustic, etc. It is advisable to water down the product
with 500 cc-1 lt. of water and to run 1 or 2 coats of the products with a roller, a cloth or a
brush to make it even. Test the colour on a hidden part of the floor to be sure it is the shade
you want. A surface of 10-15 sm can be treated with a litre of the product.

Back